| Input Power |
10-30 VDC,
typical 24 VDC (15-30 VDC if analog output used) |
| Environmental |
Temperature
-40 to 70C, humidity 0-100% operating |
| Switch Outputs |
Two solid states
switches, 150 mA
(Interposing relays are required to control higher or AC loads)
CONTROL switch: NPN or PNP; ALARM switch: NPN or PNP;
CONTROL switch maintains level by controlling fill or empty
ALARM switch ON above hi or below low setpoints, or no target
.jpg) |
| Teachable features |
Control &
Alarm setpoints, fill / empty mode, output time delay, more |
| Repeatability |
Nominal
0.1% of range at constant temperature |
| Input Power |
10-30 VDC,
typical 24 VDC (15-30 VDC if analog output used) |
| Environmental |
Temperature
-40 to 70C, humidity 0-100% operating |
| Housing |
Stainless steel,
potted and sealed, liquid tight |
| Protection |
IP68,
NEMA-4x, NEMA-6P |
|
By product
series ► |
TSL-30S1 |
TSL-30S2
* |
TSL-15S |
TSL-21S |
Range, Optimum
Range, Maximum |
3 m (10 ft.)
4.3 m (14 ft.) |
61 cm (24 in.)
91 cm (36 in.) |
6.1 m (20 ft.)
9.1 m (30 ft.) |
9.1 m ( 30 ft.)
15.2 m (50 ft.) |
| Deadband |
102 mm
(4 in.) |
*
44 mm
(1.75 in.) |
25.4 cm
(10 in. ) |
30.5 cm
(12 in.) |
Measure interval (nom)
teach options: |
50 ms
1000-25-10-5 |
50 ms
1000-25-10-5 |
100 ms
1000-50-20-10 |
200 ms
1000-100-40-20 |
| Mounting |
30mm thd.,
jam nuts |
30 mm thd.,
jam nuts |
1.5 in. NPT thd.
both ends |
Cylindrical,
bracket option |
| Size (diameter x length) |
30 x 103 mm
1.18 x 4.1 in. |
30 x 103 mm
1.18 x 4.1 in. |
48 x 102 mm
1.88 x 4.1 in. |
60 x 127 mm
2.4 x 5 in. |
| Cable, 6-ft (2 m) length |
6-wire |
6-wire |
9-wire |
9-wire |
|
* Choose TS-30S1
unless: (a) target is closer than 4 in. (103 mm), or (b) narrow beam
required at near distances |
