Senix LVL Family - Outputs Available by Model
 
MODELS
▼		 ▼   Available Outputs   ▼
0-10 VDC 4-20 mA
Current Loop		 Solid State Switch Serial Data RS-232 Serial Data RS-485
see note 1 see note 2 See note 3 see note 4

LVL-100 Series - Max range 3 m (10 ft.)
 
LVL-100-232 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		 2 wires
(+ GND)		  
LVL-100-485 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		   2 wires
(+ GND)

LVL-300 Series - Max range 6.1 meters (20 ft.)
 
LVL-300-232 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		 2 wires
(+ GND)		  
LVL-300-485 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		   2 wires
(+ GND)

LVL-500 Series - Max range 10.7 meters (35 feet)
 
LVL-500-232 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		 2 wires
(+ GND)		  
LVL-500-485 1 1 sourcing loop
1 sinking loop		 2
NPN or PNP		   2 wires
(+ GND)
Notes:
(1) The voltage range is adjustable using SenixVIEW to user selected values between 0 and 10 VDC. Default: 0-10 VDC.
(2) The current range is adjustable using SenixVIEW to user selected values between 0 and 20 mA. Default: 4-20 mA.
(3) Each sensor has 2 switch outputs, SenixVIEW selectable as NPN (sinking) or PNP (sourcing).
(4) The RS-232 and RS-485 serial data interfaces of LVL and TSPC Family products are defined by the model number as RS-232 or RS-485. All sensors use the modbus protocol to communicate with SenixVIEW or user equipment. Senix offers an OCX control software so users can easily integrate LVL or TSPC sensor communications into their systems. Serial data can also be set to an ASCII streaming output for simpler applications.