 |
ToughSonic®
"LVL" Level Sensors
Multiple Outputs, Windows PC Adjustable
More than just a
Chemically Resistant Level Transmitter
These small sensors
are designed for
ease of use and reliability in both chemical and benign industrial environments.
Used for liquid level measurement and control, they are also suited to many
other applications at distances up to 35 feet (10.7 meters). Standard electrical interfaces provide
connection to other equipment. SenixVIEW software
(included) provides adjustment, viewing, analysis, maintenance and cloning
without recalibration - whether for one or a
network of sensors -
ideal for OEM or maintenance operations where time savings is important. |
Get clarity...
 |
|
...with SenixVIEW! |
 |
Need more info?
Max: 10 ft. (3 m)
Data Sheet -
LVL-100
Max: 20 ft. (6.1 m)
Data Sheet -
LVL-300
Max: 35 ft. (10.7 m)
Data Sheet -
LVL-500
SenixVIEW Software
 |
Key Benefits & Features |
|
|
Survives Tough Environments |
 |
Not damaged by submersion |
|
|
Stable output if target lost |
|
|
|
Chemically resistant Kynar housing |
|
|
Wide temperature - high humidity |
|
|
|
Easy to Install and Use |
|
|
Industry standard outputs |
|
|
Top and bottom threaded |
|
|
|
SenixVIEW visual software included |
|
|
Quick duplication - no recalibration |
|
|
|
|
Sensor Networks & Remote Monitoring |
|
|
|
Concurrent local & remote |
|
|
SenixVIEW network setup |
|
|
|
RS-485 networks, up to 32 sensors |
|
|
Sensor network can link to LAN or
Internet (requires additional hardware) |
|
|
|
More than Just a Sensor in this Small Package! |
|
|
|
Multiple simultaneous outputs |
|
|
Level control features |
|
|
|
Adjustable filters, timers, time delays |
|
|
Conditional output responses |
|
 |
|
Summary Specifications |
|
| Our
TSPC family has
similar features...
 |
| Input Power |
10-30 VDC,
typical 24 VDC |
| Environmental |
Temp
-40 to 70C, humidity 0-100% operating, chemically resistant |
| Repeatability |
Nominal
0.1% of range at constant temperature |
| Protection |
IP68,
NEMA-4x, NEMA-6P |
| Compliance |
 |
SenixVIEW
features |
Adjustment: Over 60
functionally organized sensor parameters
Viewing: Large and small displays, chart, filtered &
unfiltered
Analysis: Measure statistics; log and replay data,
view in Excel
Maintenance: Quickly copy a sensor - no calibration
required! |
| By product
series ► |
LVL-100 |
LVL-300 |
LVL-500 |
|
Range Optimum:
Maximum: |
2 m (6.7 feet)
3 m (10 ft.) |
4 m (13 feet)
6.1 m (20 ft.) |
7.6 m (25 feet)
10.7 m (35 ft.) |
| Deadband |
6.4 cm
(2.5 inches) |
20.3 cm
(8 inches ) |
30.5 cm
(12 inches) |
| Outputs |
5 simultaneous outputs,
plus serial data
All outputs are proportional to or
affected by measured distance
Reversible analog slope - Reversible switch polarities
 |
| Models include an RS-232 or RS-485 serial data interface for
a SenixVIEW or connection, Modbus protocol.
An ASCII streaming protocol is also provided. |
| Mounting (bottom) |
1.5 inch
thread |
2-inch thread |
| Mounting (top) |
1-inch NPT
thread |
| Size |
Height:
14.3 cm (5.6 inches) Diameter: 7.7 cm (3.1 inches) |
| Cable, 6-ft (2 m) length |
9-wire |
|
These
products are not recommended for applications with hazardous or
explosive materials, or as a primary device for personal safety! |
|
| |
ToughSonic® sensors can be
pre-configured to customer needs.
|
| |
|
